Name of Equipment

LABTOP® Micro controller (PID) based Stability Test Chamber
    Air Circulation Motor and blower arrangement to have uniformity of Temperature under loaded condition. ( 2 blowers for 400 Liters and above)
    Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
    Trays Stainless Steel trays.
    Lighting Interior illumination for working area.
    Insulation 3” Thick CFC free PUF Insulation.
    Heating System U shaped S.S. Nichrome wire air heaters.
    Observation Door Inside see through unbreakable acrylic door
    Refrigeration System Hermetically Sealed CFC Free Emerson Compressor with R 134a refrigerant having state of art by pass system for continues run of compressor.
    Humidity System Non condensing type steam injection system with water level arrangement with insulation to save heat energy.
    Control System Precise control of temperature and humidity by using CE approved micro controller based PID controller (Auto tuning type)
    Validation Port 50 mm validation Port with silicon rubber seal to insert sensor for validation purpose.
    Power Works on 230 V AC single phase 50Hz
    Other Castor wheels, MCB, Adjustable Tray Height arrangements. Heavy duty latch with lock & key
    Safety Features 1. Float switch to cutoff the mains supply in case of low water level in the boiler tank.2. Dedicated safety controller with separate sensor to cut off the supply in case of overshoot and undershoot of Temperature giving audio visual alarm.3. Additional safety thermostat to cut off the boiler system in case of overshoot of temperature.4. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.
    Certifications ISO 9001: 2008 , ISO 13485 : 2012 and CE
    Documentations LABTOP will provide IQ, OQ, PQ documents with material test certificates and calibration reports

  Name of Equipment

LABTOP Micro controller (PID) based Plant Growth Chamber
    Air Circulation Two chamber blowers to have uniformity of Temperature under loaded condition. (Above 400Liters)
    Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
    Trays Stainless Steel perforated trays.
    Lighting Interior illumination for working area
    Insulation 3” Thick CFC free PUF Insulation.
    Heating System U shaped S.S. Nichrome wire air heaters
    Observation Door Inside see through unbreakable acrylic door
    Refrigeration System Hermetically Sealed CFC Free Emerson Compressor with R- 134a refrigerant having state of art by pass system for continues run of compressor
    Humidity System Non condensing type steam injection system with water level arrangement with insulation to save heat energy.
    Control System Precise control of temperature and humidity by using CE Approved micro controller based PID controller (Auto tuning type)
    Validation Port 50 mm validation Port with silicon rubber seal to insert sensors for validation purpose
    Power Works on 230 V AC single phase 50Hz
    Other Castor wheels, MCB, Adjustable Tray Height arrangement. Heavy duty latch with lock & key.
    Safety Features 1. Float switch to cutoff the mains supply in case of low water level in the boiler tank. 2. Additional safety thermostat to cut off the boiler system in case of overshoot of temperature. 3. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.
    Certifications ISO 9001: 2008 , ISO 13485 : 2012 and CE
    Documentations LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports

   Name of Equipment

LABTOP® PLC based Walk-in-Stability Test Chamber
    Control System Programmable Logic Control with Safety controller, auto changeover of Standby systems & other event managements with 3.8” Color HMI with touch screen and Ethernet connectivity
    Air Circulation Blowers to have uniformity of Temperature under loaded condition.
    Alarm Audio Visual Alarm if the temperature deviates from the preset Temperature
    Lighting Interior illumination for working area.
    Insulation 80mm Thick CFC free PUF Insulated modular cabinet
    Heating System U shaped S.S. Nichrome wire air heaters
    Observation Door Inside see through unbreakable acrylic door
    Refrigeration System Hermetically Sealed CFC Free Emerson Compressor with R- 22 refrigerant having state of art By pass system for continues run compressor
    Humidity System Non condensing type steam injection system with water level arrangement with insulation to save heat energy.
    Power Works on 230/430 V AC single / three phase 50Hz
    Other MCB, Heavy duty latch with lock & key.
    Safety Features

Float switch to cutoff the mains supply in case of low water level in the boiler tank.
Additional safety thermostat to cut off the boiler system in case of overshoot of temperature.
180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.

    Certifications ISO 9001: 2008 and ISO 13485 : 2012
    Documentations LABTOP will provide IQ, OQ, PQ documents with material Test certificates And calibration reports

  Name of Equipment

LABTOP® PLC based Walk-in-Cooling Incubator (B.O.D Incubator)
    Control System PLC with 4 channel RH and 4 channel temperature data logger, Safety controller, auto changeover of Standby systems & other event Managements with 3.7” HMI with touch screen, USB printing port and Ethernet connectivity
    Material Of construction Modular Prefabricated panels with cam & lock arrangement
    Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
    Air Circulation Motor and blower arrangement to have uniformity of Temperature under loaded condition.
    Heating System U shaped S.S. Nichrome wire air heaters.
    Insulation 3” Thick CFC free PUF Insulation.
    Lighting Interior illumination for working area.
    Observation window See through double pane glass observation window of 1 ft. x 1.5 ft
    Validation Port 50 mm validation Port with silicon rubber seal to insert sensor for validation purpose.
    Trays Stainless Steel perforated trays.
    Power Works on 230 V AC single phase 50Hz.
    Safety feature 1. Additional safety thermostat to cut off the equipment in case of overshoot of temperature. 2. safety alarm system is provided in case of any emergency

    Name of Equipment

LABTOP® PLC Based Walk-In Bacteriological Incubator
    Control System PLC with 4 channel RH and 4 channel temperature data logger, Safety controller, auto changeover of Standby systems & other event Managements with 3.7” HMI with touch screen, USB printing port and Ethernet connectivity
    Material Of construction Modular Prefabricated panels with cam & lock arrangement
    Air Circulation Motor and blower arrangement to have uniformity of Temperature under loaded condition.
    Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
    Lighting Interior illumination for working area.
    Insulation 3” Thick CFC free PUF Insulation.
    Heating System U shaped S.S. Nichrome wire air heaters.
    Observation window See through double pane glass observation window of 1 ft. x 1.5 ft
    Insulation 3” Thick CFC free PUF Insulation.
    Humidity System Non condensing type steam injection system with water level arrangement with insulation to save heat energy.
    Power Works on 230/430 V AC single/ three phase 50Hz
    Trays Not provided with the equipment
    Other MCB, Heavy duty latch with lock & key.
    Safety Features 1. Additional safety thermostat to cut off the equipment in case of overshoot of temperature. 2. safety alarm system is provided in case of any emergency

    Name of Equipment

LABTOP® PLC based walk-in-Laboratory Refrigerator
    Control System PLC with 8 channel temperature data logger, Safety controller,auto changeover of Standby systems & other event Managements with 3.7” HMI with touch screen, USB printing port and Ethernet connectivity
    Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
    Refrigeration System Hermetically Sealed CFC Free Emerson / Danfoss Compressor with R-134a refrigerant
    Air Circulation Motor and blower arrangement to have uniformity of temperature under loaded condition.
    Lighting Interior illumination for working area.
    Observation window Inside see through unbreakable acrylic door
    Trays Stainless Steel perforated trays.
    Other MCB, Adjustable Tray Height arrangement. Heavy-duty latch with lock & key
    Power Works on 230 V AC single phase 50Hz.

  Name of Equipment

LABTOP® Micro Controller based Vertical Biofreeze
    Control System Micro controller based temperature indicator cum controller with digital display and PT 100 sensor.
    Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
    Refrigeration System Hermetically Sealed CFC Free Emerson Compressor.
    Trays Stainless Steel perforated trays
    Insulation 3” Thick CFC free PUF Insulation
    Lighting Interior illumination for working area.
    Other Castor wheels, MCB, Heavy duty latch with lock & key
    Power 1. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.
2. Password protected Keypad lock.
    Safety feature Additional safety thermostat to cut off the air heater in case of overshoot of temperature
    Certification ISO 9001: 2008 , ISO 13485:2012
    Documentations LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports

   Name of Equipment

LABTOP® Micro Controller based Vertical Deep Freezer
    Control System Micro controller based temperature indicator cum controller with digital display and PT 100 sensor.
    Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
    Refrigiration System Hermetically Sealed CFC Free Emerson Compressor
    Trays Stainless Steel perforated trays.
    Insulation 3” Thick CFC free PUF Insulation.
    Other Castor wheels, MCB, Heavy duty latch with lock & key
    Power Works on 230 V AC single phase 50Hz.
    Safety Features 1. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.2. Password protected Keypad lock.
    Certifications ISO 9001: 2008 and ISO 13485 : 2012
    Documentations LABTOP will provide user manual and Calibration reports

    Name of Equipment

LABTOP® Micro Controller based Deep Freezer Horizontal
    Control System Micro controller based temperature indicator cum controller with digital display and PT 100 sensor.
    Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
    Refrigeration System Hermetically Sealed CFC Free Emerson Compressor
    Trays Stainless Steel perforated trays.
    Insulation 3" Thick CFC free PUF Insulation.
    Other Castor wheels, MCB, Heavy duty latch with lock & key
    Power Works on 230 V AC single phase 50Hz.
    Safety Features 1. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.
2. Password protected Keypad lock.

    Name of Equipment

LABTOP® Micro Controller based Vertical Biofreeze
    Control System Micro controller based temperature indicator cum controller with digital display and PT 100 sensor.
    Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
    Refrigeration System Hermetically Sealed CFC Free single stage refrigeration system with Danfoss compressor
    Trays Specially designed Stainless Steel tray
    Insulation 3” Thick CFC free PUF Insulation
    Backup Battery backup for display in case of power failure
    Other Castor wheels, MCB, Heavy duty latch with lock & key
    Power Works on 230 V AC single phase 50Hz.
    Safety feature 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor
    Certification ISO 9001: 2008 , ISO 13485 : 2012
    Documentations LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates And Calibration reports

   Name of Equipment

LABTOP® Micro Controller Based Cooling (BOD) Incubator
    Control System Micro controller based temperature indicator cum Controller with digital display and PT 100 sensor
    Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
    Refrigeration System Hermetically Sealed CFC Free Emerson Compressor with R 134a refrigerant
    Air Circulation Motor and blower arrangement to have uniformity of Temperature under loaded condition.
    Heating System U shaped S.S. Nichrome wire air heaters
    Insulation 3” Thick CFC free PUF Insulation.
    Lighting Interior illumination for working area.
    Observation Door Inside see through unbreakable acrylic door
    Validation Port 50 mm validation Port with silicon rubber seal to insert sensor for validation purpose
    Trays Stainless Steel perforated trays.
    Other Castor wheels, MCB, Adjustable Tray Height arrangement. Heavy duty latch with lock & key
    Power Works on 230 V AC single phase 50Hz.
    Safety feature 1. Additional safety thermostat to cut off the equipment in case of overshoot of temperature.
2. Password protected keypad
3. 180 seconds time delay for compressor
    Certification ISO 9001: 2008 , ISO 13485:2012
    Documentation LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports

    Name of the Equipment

LABTOP® Micro Controller Based Orbital Shaking Incubator
    Control System Micro controller based temperature indicator cum controller with digital display and PT 100 sensor.
    Refrigeration System Hermetically Sealed CFC Free Emerson compressor with R 134a refrigerant
    Alarm Audio Visual Alarm if the temperature deviates from the preset temperature
    Air Circulation Motor and blower arrangement to have uniformity of temperature under loaded condition.
    Heating System U shaped S.S. Nichrome wire air heaters.
    Insulation 3” Thick CFC free PUF Insulation.
    Lighting Interior illumination for working area.
    Observation Door Inside see through unbreakable acrylic door
    Other MCB, Adjustable Tray Height arrangement. Heavy duty latch with lock & key
    Power Works on 230 V AC single phase 50Hz.
    Certifications ISO 9001: 2008 , ISO 13485 : 2012 and CE
    Documentations LABTOP will provide IQ, OQ, PQ documents with material test certificates and calibration reports

   Name of Equipment

LABTOP® Micro Controller Based Micro plate shaker incubator
    Control System Micro controller
    Display LCD Display with back light
    Motor Brushless DC motor
    Amplitude 2 mm
    Outer body ABS plastic
    Temperature uniformity ± 1.0
    Timer 1-99 hrs.
    Input Voltage Works on 230/110 V AC single 50/60Hz.
    Certification ISO 9001: 2008 , ISO 13485 : 2012
    Documentation User manual with calibration test reports

  Name of Equipment

LABTOP® Laminar Air Flow
    Work Table Stainless Steel (304)
    Height Of the stand 650 mm
    Filter Type HEPA filter
    Efficiency 99.99%
    Particle Retention 0.3 Micron
    Cleanliness Class 100
    Air flow velocity 0.3 – 0.5 m/s
    Illumination of work surface Fluorescent tube light
    Blower-motor assembly Dynamically balanced
    Noise level 65 decibel
    Static pressure measurement Magnehelic Gauge
    Pre Filter Disposable, Non washable polyester fiber
    Ultra violet tube light 3 feet, 30 Watt - PHILIPS - HOLLAND make - 1 No.
    Front Sash Motorised shattered proof Glass door
    Other Castor wheels, MCB.
    Certifications ISO 9001: 2008 , ISO 13485 and CE
    Documentations LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports

   Name of Equipment

LABTOP® Micro Controller Based Laboratory rocker
    Control System Micro controller based speed indicator cum controller with LCD display
    Rocking Platform Mild steel powder coated with non slip mat
    Rocking motion See-saw rocking
    Material of construction ABS molded
    Operation Continues
    Power Works on100 - 230 V AC single phase
    Frequency 50Hz.
    Power consumption 50 watts
    Weight of LCR-180 3 kg
    Weight of LCR-330 9 kg
    Motor Brushless D. C. Motor
    Drive Variable Drive
    Speed accuracy ± 1 rpm
    Certifications ISO 9001: 2008 , ISO 13485 : 2012 and CE
    Documentations LABTOP will provide user manual & and calibration reports

    Name of the Equipment

LABTOP® Micro Controller Based Multi Tube Biomixer
    Control System Micro controller based controller with LCD display
    Display Speed and time
    Amplitude 3.6 mm
    Speed 500 – 2500 rpm
    Speed accuracy ± 25
    Timer 0-99.99 Hrs
    Alarm Audio Visual
    Dimensions of the tray 31 x 18cm
    Outer Dimensions 426 x 250 x 480mm
    MOC Mild steel powder coated
    Power Works on 230 V AC single phase 50Hz.
    Company certifications ISO 9001:2008 and ISO 13485:2012
    Documentations User manual and calibration report

  Name of the Equipment

LABTOP® Micro Controller Based Tube roller
    Control System Micro controller based controller with LCD display
    Display Speed and time
    Motion Rocking and Rolling
    Speed 0 – 70 rpm
    Amplitude 24 mm
    Timer 0-1199 min
    Alarm Audio Visual
    Number of Rollers 6 Nos.
    Outer Dimensions 450 x 260 x 120mm
    MOC ABS molded
    Power Works on 230 V AC single phase 50Hz.
    Company certifications ISO 9001:2008 and ISO 13485:2012
    Documentations User manual and calibration report

    Name of Equipment

LABTOP® Micro Controller Based Dry Bath Incubator
    Control System Micro controller based temperature indicator cum controller with LCD display and PT 100 sensor.
    Display Set Value and Process Value
    Power Works on 230 V AC single phase 50Hz
    Timer 0-99.99 Hrs
    Safety feature Safety thermostat to cut off the heater in Case of overshoot of temperature.
    MOC ABS molded
    Alarm Audio visual
    Company Certifications ISO: 13485: 2012 , ISO 9001: 2008 and CE

 Name of Equipment

LABTOP® Micro Controller Based Mini Dry Bath Incubator
    Control System Micro controller based temperature indicator cum controller and PT 100 sensor
    Display LCD, Set Value and process Value
    Power Works on 230 V AC single phase 50Hz.
    Heating block Aluminum
    Timer 0-99.99 Hrs
    Material of construction ABS molded
    Alarm Audio visual
    Documentation User manual with calibration certificates
    Safety feature safety cut off the air heater in case of overshoot of temperature.
    Certifications ISO 9001: 2008, ISO 13485 : 2012